Get GT13E2 Quote

GT13E2 Spare Parts Supplier — Independent Manufacturer for ABB / Alstom GT13E2 Fleets

ZURN Power supplies OEM-drawing spare parts for the ABB / Alstom GT13E2 fleet, including GT13E2-V96 and GT13E2 MXL configurations. We manufacture turbine blades, nozzle guide vanes, burner hardware, compressor blades, rotor components and high-temperature bolting — no OEM authorization required, MOQ 1 piece, 8–14 weeks standard lead time, EN 10204 3.1 certification on every shipment.

Standard lead time
8–14 weeks
Minimum order
1 piece
Certification
EN 10204 3.1 / 3.2
Supply modes
New build + repair
Fleet covered
GT13E2 / -V96 / MXL

What we supply for the GT13E2 fleet

Component groupTypical material gradeManufacturing routeStandard lead time
Turbine rotor blades (all stages)IN738LC / IN738 / Mar-M247 / EEQ111Vacuum investment casting + HIP + heat treatment + aluminide or MCrAlY coating10–14 weeks
Nozzle guide vanes / turbine vanesIN738LC / IN939 / Mar-M247Vacuum investment casting + HIP + TBC10–14 weeks
Burner, liner, transition pieceIN625 / IN718 / Hastelloy C-276 / 1.4841Sheet forming + welding + machining + heat treatment8–12 weeks
Compressor blades & stator vanes12Cr martensitic / 17-4PH / Ti-6Al-4VPrecision forging + 5-axis CNC + shot peening + FPI8–12 weeks
Rotor discs, spacers, tie bolts26NiCrMoV145 / 1CrMoV / IN718Open-die forging + machining + UT/MT + balancing12–16 weeks
Seals, casings, high-temperature boltingIN718 / X22CrMoV12-1 / 1.4980Machining + heat treatment + clearance and preload verification6–10 weeks

Commercial terms

ItemZURN Power standard
Minimum order quantity1 piece — single-part orders and sample parts accepted
Standard lead time8–14 weeks ex-works (expedited slots available for outage-driven orders)
DocumentationEN 10204 3.1 as standard; 3.2 (third-party witness) on request
IncotermsEXW / FCA / FOB Shanghai or Ningbo / CIF / DAP by agreement
PaymentT/T 30–50% advance, balance before shipment; L/C at sight for qualified buyers
Warranty12 months from commissioning or 18 months from shipment, whichever comes first
OEM authorizationNot required — parts are manufactured to OEM drawing or by reverse engineering from a sample

How to raise an RFQ that gets priced in 48 hours

Suppliers lose days on incomplete enquiries. Send the following and you get a firm quote on the first pass:

Data pointWhy it matters
Exact model (GT13E2, GT13E2-V96 or GT13E2 MXL) and unit serial numberDetermines the combustion and hot gas path configuration
Part number or OEM drawingRemoves all dimensional ambiguity; a sample part works if no drawing exists
Quantity and target delivery dateDecides whether we quote from stock, from an open production slot or on a dedicated route
Material certificate requirement (3.1 / 3.2)3.2 adds third-party witness time and cost
Destination port and IncotermFixes freight and insurance scope

Request a quotation

Get a quotation within 48 hours

Send the model, part number, drawing or BOM and required quantity. You receive scope, material certification, lead time and price — no OEM authorization needed.

Frequently Asked Questions

Are you an authorized Alstom / GE supplier?

No, and you do not need one. ZURN Power manufactures and repairs gas turbine parts to OEM drawing or by reverse engineering from a sample part. We are an independent manufacturer, which is why our lead times are 8–14 weeks against OEM programmes that routinely run 12–18 months for the same hot gas path components.

What is the minimum order quantity for GT13E2 parts?

One piece. We accept single-part orders, sample parts and full hot gas path sets. There is no surcharge for small quantities on standard routes.

Can you supply parts without an OEM drawing?

Yes. Send the used part or a 3D scan and we reverse engineer it — dimensional inspection, material spectrometry and a manufacturing drawing are produced before any metal is cut. The drawing is then submitted to you for approval.

Which material certificates do you provide?

EN 10204 3.1 is standard on every shipment, covering chemical analysis, mechanical properties and heat treatment records. EN 10204 3.2 with third-party witness (TÜV, SGS, BV or Lloyd's) is available on request.

Do you supply both new parts and repair?

Both. New manufacture covers blades, vanes, burners, compressor blades, seals and bolting. Repair and refurbishment covers rotor overhaul, blade tip restoration, coating renewal, weld repair on burner hardware and dimensional restoration of seals.

ABB / Alstom Gas Turbine Family — All 12 Models We Support

Dedicated spare parts, repair and technical support pages for every model of the ABB / Alstom heavy-duty fleet: